Introduction
Package Contents
Inserting your earphones
Choosing and changing sleeves
Congratulations on your purchase of the ARNC01 Active Noise-Canceling Headphones.
The technologically advanced 9.25 mm in-ear headphones actively isolate and cancel
outside noise with a simple flick of an on/off switch, letting you enjoy crystal clear
sound on your music player. And the small size of the headphones provides for hours
of comfortable wear whether you’re enjoying music at home or on the go.
Before you get started with these earphones, take a moment to get familiar with the
package contents.
Individual AR earphones are designed specifically for either the left or right side.
Experiment with the different sizes in this package to find the right sleeves for you.
Changing the sleeves is easy.
Make sure you find the left (L) or right (R) marking on the
inside of each earphone so you know which side is which.
•
•
•
•
•
Earphones and noise-cancellation activator with clip
3 silicone earbud sleeves (small, medium and large)
Airline plug adapter
User’s guide
Two AAAA batteries
1. To remove the sleeve on the
earphone, pull gently on one sides
of the sleeve at the base of the stem
until the sleeve comes off.
This manual covers connection and detailed operating instructions for setup and
use of the ARNC01 Active Noise-Canceling Headphones. If, after having reviewed the
instructions, you have any questions, please call toll-free 1-800-732-6866 or visit
Left marking
sleeve
Installing the Batteries
The ARNC01 earbuds require a single AAAA battery for active noise canceling.
2. Position the replacement sleeve at
a slight downward angle over the
earphone stem. Gently push the
sleeve up and onto the stem until it
fits securely in place.
Features
Active noise-canceling technology: A simple on/off switch on the side of the unit
provides true noise-canceling functionality that delivers high quality sound.
Make sure the sleeves cover the end of the earphone stems.
To install the battery:
Battery
compartment
cover
1. Press and push the battery
stem
compartment cover to remove it.
Ultra-comfortable: 9.25 mm in-ear design provides superior sound insulation
without compromising comfort.
2. Insert the battery, matching it to the
3. Push the end of the sleeve gently
to make sure it covers the stem
completely.
Finally, gently insert your earphones in each ear, just far enough that they fit
securely—do not push beyond the ear canal opening!
(+) and (–) marks inside the battery
compartment.
2-pin airline jack: Connects the headphones to an airplane’s entertainment system.
Note: Once you’ve put on your earphones, use the cord adjuster to increase or
decrease the amount of slack in the cord.
Convenient power source: The noise cancelation module uses a standard-size AAAA
battery.
3. Push the battery cover back into place.
Connecting to your audio device
1. Turn the volume of your audio device all the way down.
2. Plug the earphone mini-plug into the headphone jack on your audio device.
3. Put on your earphones.
These earphones come with the small sleeves installed. If these don’t fit the way you
want them to, try a different size—the next section tells you how to change sleeves.
Product information
Battery Precautions: Always remove old, weak or worn-out batteries promptly and recycle or dispose of
them in accordance with Local and National Regulations.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and
record the model number in case you need it. These numbers are located on the product.
Model No.:__ARNC01____________Purchase Date:____________________________
Dealer/Address/Phone:____________________________________________________
4. Turn up the audio device volume slowly.
|